Websites about the AK47
AK47 Websites.com
 Sun. Feb 5, 2012
<< Back

Frequently Asked AK47 Questions
393 Questions answered
Read past questions and the answers
Ask our Experts Questions about shooting, Click Here
It's FREE to ask our experts a question,
you don't need to fill out any personal information
But if you do want a reply, include your contact information, it will not be made public

1 2 3 4 5 6

Question:  I have a russian ak47 parts kit that needs a milled reciever. I havent had any luck finding one that
Moving Up in Rating 1 Star Rating 1.73 out of 10
Rated: 1.73 / 10
26 votes
9605 visits
Answer:  No a stamped will not work

There is only one Milled Receiver to get IMO that is the F  .. Read full reply
Submitted by: Jim Parrott, 01/02/2010
Answered by: AK47 Dood,
Question:  Polymer mags fit tight in my WASR 10 mag well, but steel mags flop around (I dont even know how well
Moving Up in Rating 1/2 Star Rating 0.18 out of 10
Rated: 0.18 / 10
17 votes
9568 visits
Answer:  Not much to do if the mag well is too big, and it sounds like yours is.

You could do   .. Read full reply
Submitted by: adam Parsons, 01/02/2010
Answered by: AK47 Dood,
Question:  I have a Norinco Mak-90 with slant cut stamped reciever single tang and i would like to put on a Tap
Moving Up in Rating 1/2 Star Rating 0.52 out of 10
Rated: 0.52 / 10
25 votes
9417 visits
Answer:  I am not sure there is an adaptor for that. Have you looked at Ace stocks? THey might have something  .. Read full reply
Submitted by: Tony Manson, 01/01/2010
Answered by: AK47 Dood,
Question:  When my firend is shooting his AK-47 it he is telling me that it does not fire all the time? He said
Moving Up in Rating 1/2 Star Rating 0.06 out of 10
Rated: 0.06 / 10
33 votes
6181 visits
Answer:  you could be correct, it could also be bad springs, or a broken firing pin

Lots to lo  .. Read full reply
Submitted by: Tony, 01/01/2010
Answered by: AK47 Dood,
Question:  I own an AMD 65, and I would like to put normal AK wooden handguards on it. In order for me to do th

Rated: 0.00 / 10
36 votes
5907 visits
Answer:  We don't build or sell stuff like that, some of our sponsors do, you might try talking to them  .. Read full reply
Submitted by: Marcus, 12/28/2009
Answered by: AK47 Dood,
Question:  How many different calburs do ak-47s come in?
Moving Up in Rating 1/2 Star Rating 0.02 out of 10
Rated: 0.02 / 10
59 votes
7550 visits
Answer:  usually
7.62x39
5.45 x 39
5.56 x 45

www.ak-47.us  .. Read full reply
Submitted by: G williams, 12/24/2009
Answered by: AK47 Dood,
Question:  what cal. is a yugo sks model 59/56 then it says 7.62*59
Moving Up in Rating 1/2 Star Rating 0.33 out of 10
Rated: 0.33 / 10
33 votes
5112 visits
Answer:  it is 7.62x39
sounds like yours might have a sloppy stamp, or a bit of the '3' is worn away <  .. Read full reply
Submitted by: Guest, Wed. Dec 23, 2009
Answered by: AK47 Dood,
Question:  hi,actualy ihave been surching alot about the east german ak-47 with fixed stock.
NOTE:this a
Moving Up in Rating 1/2 Star Rating 0.03 out of 10
Rated: 0.03 / 10
38 votes
5623 visits
Answer:  We have some photos posted on this AK.. it's one of our favorites too  .. Read full reply
Submitted by: Mark, 12/23/2009
Answered by: AK47 Dood,
Question:  Is there an adapter for above receiver that can be used to attach a folding stock ?

T
Moving Up in Rating 1/2 Star Rating 0.03 out of 10
Rated: 0.03 / 10
37 votes
5249 visits
Answer:  I don't think so

I have seen some adapters for milled receivers, but I don't think th  .. Read full reply
Submitted by: Ed, 12/21/2009
Answered by: AK47 Dood,
Question:  I have recently purchased a hi cap wasr 10. I am wanting to take it hunting, but here you have to us
Moving Up in Rating 1/2 Star Rating 0.03 out of 10
Rated: 0.03 / 10
35 votes
8487 visits
Answer:  Yes and no

There are more than one kind of 10 round magazine

Yours wil  .. Read full reply
Submitted by: Brad Ward, 12/21/2009
Answered by: AK47 Dood,
Question:  Thanks in advance for your guys helpful advice.
ok, so i have a preban polytech aks-762 with
Moving Up in Rating 1/2 Star Rating 0.03 out of 10
Rated: 0.03 / 10
35 votes
4728 visits
Answer:  Sounds like you have a fairly rare AK there (prob maderate to high value). and you are talking about  .. Read full reply
Submitted by: tyler, 12/19/2009
Answered by: AK47 Dood,
Question:  Received a parts kit from a friend. The lower receiver has been cut in half. I am unable to identify

Rated: 0.00 / 10
5 votes
2039 visits
Answer:  sounds like you have some research to do

My advice is you are just starting to see wh  .. Read full reply
Submitted by: Dennis Johnson, 12/19/2009
Answered by: AK47 Dood,
Question:  Will a bolt from a Polytech AKS in 5.56 cal fit/work in a bolt carrier for a 7.62 AK? I'm building
Moving Up in Rating 1/2 Star Rating 0.03 out of 10
Rated: 0.03 / 10
34 votes
4237 visits
Answer:  I do not think that will fit or work for you  .. Read full reply
Submitted by: Chris LeGeaux, 12/19/2009
Answered by: AK47 Dood,
Question:  I'm looking at doing a build using the following combination:

Nodak NDS-3 economy rec
Moving Up in Rating 1/2 Star Rating 0.34 out of 10
Rated: 0.34 / 10
32 votes
4297 visits
Answer:  Sorry it's been a while since I have built AKs.. I suggest you check out the AK Fourm forspecific he  .. Read full reply
Submitted by: Justin Turney, 12/17/2009
Answered by: AK47 Dood,
Question:  I have a Romanian SAR-1 that has the bayonet lug wings ground off. What bayonet will fit it?
Moving Up in Rating 1/2 Star Rating 0.03 out of 10
Rated: 0.03 / 10
40 votes
4323 visits
Answer:  Good news is they will all fit,

Bad news is noe will stay on without the wings
  .. Read full reply
Submitted by: John Cirelli, Jr., 12/16/2009
Answered by: AK47 Dood,
Question:  IS A NORINCO AK47 TRIANGLE 66 756S7 A PREBAN
NY IS TUFF WAS SUPPOSE TO BE WHEN I PURCHASED IT

Rated: 0.00 / 10
38 votes
4719 visits
Answer:  I would not be certain of when anything in China was made. You can research when rifles were importe  .. Read full reply
Submitted by: Richard Kretzmer, 12/15/2009
Answered by: AK47 Dood,

Question:  what is your opinion on the "inter ordunce" ak47 sold by Bud's gun shop on line ($500-600)

Rated: 0.00 / 10
35 votes
3479 visits
Answer:  Not sure, I haven't seen them, sorry I can't be more help  .. Read full reply
Submitted by: robert byram, 12/15/2009
Answered by: ,
Question:  Regarding the Norinco "Hunter" AK variant, with the sliding magazine release instead of th

Rated: 0.00 / 10
37 votes
3364 visits
Answer:  Not that I am aware of  .. Read full reply
Submitted by: James, 12/13/2009
Answered by: AK47 Dood,
Question:  I have a Yugo AKM-47 M70 series with a factory slant muzzel brake. I understand that it has 14mm LH

Rated: 0.00 / 10
34 votes
4083 visits
Answer:  is it tack welded?

you can try heating it up, using a wd-40 like oil
some peop  .. Read full reply
Submitted by: Al, 12/13/2009
Answered by: AK47 Dood,
Question:  Who is the smart #ss that calls himself ak47dood!!!Are you on here to help people or just be a d#ck?
Moving Up in Rating 1/2 Star Rating 0.11 out of 10
Rated: 0.11 / 10
9 votes
3099 visits
Answer:  I am
I am here to have fun since it is a free service you are free to use the websites and yo  .. Read full reply
Submitted by: Guest, Sun. Dec 13, 2009
Answered by: AK47 Dood,
Question:  What do I need to do to "open" the mag well of my wasr 10 to accept hi-cap mags? Is this s

Rated: 0.00 / 10
34 votes
4853 visits
Answer:  Many people do that themselves
But most gunsmiths should be able to help if you don't want to  .. Read full reply
Submitted by: Quan, 12/11/2009
Answered by: AK47 Dood,
Question:  i have a norinco 5.56 Chinese import bwk92 sporter with the thumb hole stock, is it legal to put a p
Moving Up in Rating 1/2 Star Rating 0.03 out of 10
Rated: 0.03 / 10
35 votes
5070 visits
Answer:  #1 all local and federal laws apply so you must know them

#2 federal law 922r says yo  .. Read full reply
Submitted by: tkgmalice, 12/11/2009
Answered by: AK47 Dood,
Question:   I have a yugo SKS. I have to manually retract the bolt to clear the spent shell after each round. W

Rated: 0.00 / 10
25 votes
2309 visits
Answer:  Sounds like a broken ejector (or extractor) check thise parts first   .. Read full reply
Submitted by: Guest, Tue. Dec 8, 2009
Answered by: AK47 Dood,
Question:  Do they make the CAA X47 AK 5-Rail System in O.D Green? If they do...where can I find it?

Rated: 0.00 / 10
31 votes
2853 visits
Answer:  I am sure they do, but I haven't shopped for their products in a while, so I can only suggest search  .. Read full reply
Submitted by: Guest, Tue. Dec 8, 2009
Answered by: AK47 Dood,
Question:  I have a milled reciever MAK-90 and would like to lose the uncomfortable thumbhole stock. Can I buy

Rated: 0.00 / 10
25 votes
3398 visits
Answer:  It will be difficult to find a US made wood stock for it since you will also need to follow 922r
Read full reply
Submitted by: Doug Brown, 12/07/2009
Answered by: AK47 Dood,
Question:  why do flimsy tapco polymer mags work im my wasr while steel mags will not fit? i have heard that f

Rated: 0.00 / 10
26 votes
3724 visits
Answer:  ususally filing goes the other way, all it will do is make your steel mags rattle IMO  .. Read full reply
Submitted by: Mark Huck, 12/04/2009
Answered by: AK47 Dood,
Question:  Im hearing if your going to get an AK get one with a milled reciever... and lancaster arms makes the
Moving Up in Rating 1/2 Star Rating 0.40 out of 10
Rated: 0.40 / 10
25 votes
4125 visits
Answer:  That is very much opinion

Ask yourself this.. if the milled was so good, whay did Rus  .. Read full reply
Submitted by: jason, 12/03/2009
Answered by: AK47 Dood,
Question:  is there a way where the trigger pull could be reduced it is a little stiff
Moving Up in Rating 1/2 Star Rating 0.04 out of 10
Rated: 0.04 / 10
27 votes
4098 visits
Answer:  You could install a US trigger, try the Tapco, most people like theirs a lot  .. Read full reply
Submitted by: jim bascino, 12/03/2009
Answered by: AK47 Dood,
Question:  what is the bracket on the left side of a wasr GP-10 used for?

Rated: 0.00 / 10
27 votes
3699 visits
Answer:  optics / scopes  .. Read full reply
Submitted by: mack, 11/30/2009
Answered by: AK47 Dood,
Question:  What ak muzzle brake will give me the best possible accuracy?

Rated: 0.00 / 10
28 votes
3396 visits
Answer:  Not aware of any that have been proven to be more accurater than others.. or any that are known to b  .. Read full reply
Submitted by: Doug, 11/29/2009
Answered by: AK47 Dood,
Question:  i have a mak-90 type ak-47 (7.62x39) i would like to know how do you reassemble the magazine catch/r

Rated: 0.00 / 10
23 votes
3167 visits
Answer:  Have you tried You Tube? sounds like a DVD would be your best bet, but you tube might have a clip of  .. Read full reply
Submitted by: rick mcwhirter, 11/29/2009
Answered by: ,
Question:  I own an EAA ZAP AK-47 made in Serbia. It comes with a ten round magazine in 7.62x39. My question

Rated: 0.00 / 10
36 votes
3931 visits
Answer:  I haven't seen that one but I suspect it will use 'regular' AK mags since almost all AKs use them  .. Read full reply
Submitted by: Chuck Nagel, 11/28/2009
Answered by: AK47 Dood,
Question:  Folks,
I have a Garcia Bronco 22 wireframe rifle, that I've had for many years, and as I've d

Rated: 0.00 / 10
32 votes
3959 visits
Answer:  Sorry it has been a long time since I looked at one of those

Have you tried pulling t  .. Read full reply
Submitted by: Russ Bassani, 11/26/2009
Answered by: Tucson Guns,
Question:  will a US or romanian ak-47 barrel fit on an egyptian ak-47 reciver, or dose it require a conversion

Rated: 0.00 / 10
25 votes
3588 visits
Answer:  It depends, but usually they should fit  .. Read full reply
Submitted by: rebel son, 11/25/2009
Answered by: AK47 Dood,
Question:  Hello, I bought a romanian AK-47 rifle kit a few years ago after reading an article in shotgun news

Rated: 0.00 / 10
27 votes
3340 visits
Answer:  You can buy a receiver and just have it transfered to your gun shop

Do you have all t  .. Read full reply
Submitted by: Ben, 11/24/2009
Answered by: AK47 Dood,
Question:  whats better ak-47 or m-4 carbine

Rated: 0.00 / 10
17 votes
5567 visits
Answer:  That question will be around for a long time  .. Read full reply
Submitted by: thomas sells, 11/24/2009
Answered by: AK47 Dood,
Question:  Hi,

I wanted to take my boyfriend to a shooting range in Tucson for his birthday. Ar
Moving Up in Rating 1/2 Star Rating 0.07 out of 10
Rated: 0.07 / 10
15 votes
3797 visits
Answer:  There are only two ranges that rent firearms they are both named Marksman  .. Read full reply
Submitted by: Jane Waterfall, 11/24/2009
Answered by: ,
Question:  I just bought a Romanian AK-47 and I have been having some issues. I was wondering if you could giv

Rated: 0.00 / 10
11 votes
3778 visits
Answer:  Sounds like it has some problems.
How new is it?

If it's still new the rails m  .. Read full reply
Submitted by: Ed Emerson, 11/23/2009
Answered by: AK47 Dood,
Question:  I have a yugo m72 rpk. i found a stock adapter from ace stocks. now i'm looking for a quad rail or a
Moving Up in Rating 1/2 Star Rating 0.20 out of 10
Rated: 0.20 / 10
10 votes
3273 visits
Answer:  Only a few companies make them to fit the Yugo AK. I haven't looked for them recently   .. Read full reply
Submitted by: Gary Poole, 11/22/2009
Answered by: AK47 Dood,

Next >> Last

Top of Page

Ask our Shooting Experts a Question
It's FREE to ask our experts a question,
you don't need to fill out any personal information except your name
If you want a reply, include your contact information, which will not be made public
Click Here


AK47 Web Home Page
Ask AK47 Experts
AK47 Questions
AK47 Chat
AK47 Information
AK47 in the News
AK47 Pictures
AK47 Classifieds
Untitled Document

Like our website?
Help keep it free of ads
Please donate a dollar
or two, Thanks

Sponsored in part by

Kaiser Shooting Products is a licensed FFL manufacturer with a CNC machine house dedicated to producing quality products made in the USA with US certified raw materials. Their parts are designed and engineered on the latest Solid Works program then machined and tested in the field. And we are proud to have Kaiser Shooting Products as a Premium Sponsor of our website Network

Support This Site
(C) Copyright AK47 Websites.com ™ All Rights Reserved ©
All trademarks, images and articles are property of their respective owners
Questions ? - Please Read Our Policy Page
Website maintained & hosted by AZ13.com
Everything about AK47 websites